Standard:
SUCCESS pressed steel sectional water tank constructed with hydraulically pressed flanged panels
Flanges of Plates :
The tank plates are pressed with a combined double flange at an angle of 45 degree and 90 degree to the face of the plate on four sides
Stays and Cleats :
The stays and cleats are made of steel angle bar and steel plate
Bolts, Nuts and Washers:
Hot Dipped Galvanised steel bolts, nuts and washers for internal and external.
Jointing Materials :
Non toxic PVC foam to be used for all jointing between tank panel flange
Tank Cover :
Panel type tank cover supported by trusses and poles 600 x 600 square manhole and 100mm air-vent supplied as standard for each compartment
Water Level Indicator :
Mechanical Ball Float Type
Ladder :
Alumninium ladder for internal and external
Finish :
(a) Hot Dip Galvanised conform to BS 729 or ISO equivalent
(b) Black Bituminous Coated
Standard Thickness for 1m x 1m Tank Panel
|
Type |
1.0m (H) |
2.0 (H) |
3.0m (H) |
4.0m (H) |
5.0m (H) |
|
5th side panels |
|
|
|
|
5mm |
|
4th side panels |
|
|
|
5mm |
5mm |
|
3rd side panels |
|
|
5mm |
5mm |
5mm |
|
2nd side panels |
|
5mm |
5mm |
5mm |
5mm |
|
1st side panels |
5mm |
5mm |
5mm |
5mm |
5mm |
|
Bottom panels |
5mm |
5mm |
5mm |
5mm |
5mm | | 
